TechniSat DIGITRADIO 10 IR

119
DE
EN
NL
FR
Stations with a signal intensity below the required minimum signal intensity
are not transmiing a strong enough signal. Align the dipole antenna, if
required, as described in Section 6.3.1.
9.2.7 Manual seing
This menu item is used to check the reception channels and can be used to align the
antenna. Furthermore, stations can be added manually.
> Press the MENU buon and use the / buons to select the [Scan
seings] > [Set manually] entry, then press the OK buon.
> Use the / and OK buons to select a channel (5A to 13F). The signal
intensity will now be shown on the display. If a DAB+ station is being received
on a channel, the station ensemble name is displayed. The antenna can now
be aligned to the maximum signal intensity.
Stations with a signal intensity below the required minimum signal intensity
are not transmiing a strong enough signal. Align the dipole antenna, if
required, as described in Section 6.3.1.