TechniSat DIGITRADIO 10 IR User Manual

146
> Use the /buons to select the following options:
[Update from Internet] (Update via the Internet)
[Update from DAB] (Update via DAB+ only)
[Update from FM] (Update via FM only)
[No update] (Time/date must be entered manually, see Section 16.2.1).
> Press the OK buon to save the seing.
If you have selected [Update from Internet], you must also configure the time
zone and the summer-/wintertime seing. This is carried out under [System
seings] >[Time/Date] > [Time zone] and [System seings] > [Time/Date]
> [Summertime].
16.2.3 Seing the time format
Under Set format you can activate the 12 or 24 hour format.
> Press the MENU buon and use the/ buons to select the [System
seings] > [Time/Date] > [12/24 Hours] item, then press OK.

TechniSat DIGITRADIO 10 IR Specifications

General

Radio type	Internet
Tuner type	Digital
FM band range	87.5 - 108 MHz
DAB band range	174 - 240 MHz
Supported radio bands	DAB+, FM
Preset stations quantity	60
Equalizer	Yes
RMS rated power	- W
Built-in speaker(s)	No
Display type	TFT
Display diagonal	2.8 \
Display resolution	240 x 320 pixels
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version	4.1
Coloration	Monochromatic
Thermometer	-
Antenna type	External
Product color	Black, Silver
Internet radio services supported	Spotify
On Screen Display (OSD) languages	DAN, DEU, DUT, ENG, FIN, FRE, ITA, NOR, POL, POR, SWE
Power source	AC/DC
AC input voltage	230 V
DC input voltage	5 V
AC input frequency	50 Hz
Power consumption (standby)	0.72 W
Power consumption (typical)	1.4 W
Clock mode	24h
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	5 - 90 %

Weight and Dimensions

Width	- mm