TechniSat DIGITRADIO 10 IR

124
> Select whether the scan should only stop for stations with a strong signal
[Strong Stations Only] or for all stations (including stations with a weak
signal) [All Stations].
With the All Stations seing, the scan stops automatically upon detecting
each available station. This can result in weak stations being played with
background noise.
> Press the OK buon to save.
10.6 Audio seings
> Push the MENU buon and select [Sound seings].
> Use / to select the [Stereo available] or [Mono only] item to play back in
stereo or only in mono sound when the FM reception is weak.
> Confirm the seing by pressing the OK buon.
10.7 Saving FM stations to a memory slot
The station memory can save up to 30 stations in the FM range.