TechniSat DIGITRADIO 10 IR User Manual

125
DE
EN
NL
FR
> First set the desired station frequency (Section 10.3, 10.4)
> In order to store this station in a memory slot, hold down the FAV buon
while playing until [Save channel] appears on the display. Then use the /
buons to select a favourites memory slot (1 - 30). Press the OK buon to
save.
> Repeat this process to save additional stations.
You can also save stations to one of the One-Touch buons (1 - 10) by
holding down the corresponding buon a lile longer (0 buon = 10). To save
to memory slots 11 - 30, briefly press the Number entry buon (17) and then
hold down the second number.
10.8 Retrieving FM stations from a memory slot
> To retrieve a station that you have stored in the FAV memory, briefly press the
FAV buon and select a station slot (1 - 30) using the / buons. Press the
OK buon to play the station.

TechniSat DIGITRADIO 10 IR Specifications

General

Radio type	Internet
Tuner type	Digital
FM band range	87.5 - 108 MHz
DAB band range	174 - 240 MHz
Supported radio bands	DAB+, FM
Preset stations quantity	60
Equalizer	Yes
RMS rated power	- W
Built-in speaker(s)	No
Display type	TFT
Display diagonal	2.8 \
Display resolution	240 x 320 pixels
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version	4.1
Coloration	Monochromatic
Thermometer	-
Antenna type	External
Product color	Black, Silver
Internet radio services supported	Spotify
On Screen Display (OSD) languages	DAN, DEU, DUT, ENG, FIN, FRE, ITA, NOR, POL, POR, SWE
Power source	AC/DC
AC input voltage	230 V
DC input voltage	5 V
AC input frequency	50 Hz
Power consumption (standby)	0.72 W
Power consumption (typical)	1.4 W
Clock mode	24h
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	5 - 90 %

Weight and Dimensions

Width	- mm