TechniSat DIGITRADIO 10 IR User Manual

144
16.1.5 WLAN connection on standby
> Under [WLAN active on standby], select whether the WLAN connection is to
be maintained in standby mode (YES) or not (NO).
Note that, for unrestricted and smooth use and operation via the TechniSat
CONNECT App, this function must remain switched on.
The TechniSat CONNECT App can be downloaded from your smartphone's App
store.
16.2 Time and date seings
16.2.1 Manually seing the date/time
Depending on the seing for time updates (Section 16.2.2), the date and time might
have to be set manually.
> Press the MENU buon and select the [Time/Date] item in the [System
seings] submenu.
> Then press OK.
> Use the / buons to select the [Set] and press OK.

TechniSat DIGITRADIO 10 IR Specifications

General

Radio type	Internet
Tuner type	Digital
FM band range	87.5 - 108 MHz
DAB band range	174 - 240 MHz
Supported radio bands	DAB+, FM
Preset stations quantity	60
Equalizer	Yes
RMS rated power	- W
Built-in speaker(s)	No
Display type	TFT
Display diagonal	2.8 \
Display resolution	240 x 320 pixels
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version	4.1
Coloration	Monochromatic
Thermometer	-
Antenna type	External
Product color	Black, Silver
Internet radio services supported	Spotify
On Screen Display (OSD) languages	DAN, DEU, DUT, ENG, FIN, FRE, ITA, NOR, POL, POR, SWE
Power source	AC/DC
AC input voltage	230 V
DC input voltage	5 V
AC input frequency	50 Hz
Power consumption (standby)	0.72 W
Power consumption (typical)	1.4 W
Clock mode	24h
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	5 - 90 %

Weight and Dimensions

Width	- mm