TechniSat DIGITRADIO 10 IR

150
> Press the MENU buon and use the /buons to select the [System
seings] > [Factory seings] item, then press OK.
> Use / to select the [Yes] option, then press OK to reset to the factory
seings.
All previously stored stations and seings will now be deleted. The device is
now in the same status as when delivered.
> The display will show [Restart ...] and the device will start using the
language selection [Language]. Please refer to the information in Section „8
Ersteinrichtung“ auf Seite 112.
16.6 System info
Under Soware version you can retrieve the currently installed soware version.
> Press the MENU buon and use the /buons to select the [System
seings] > [System info] item, then press OK.
> The current soware version is displayed.