How to improve DAB/FM reception on TechniSat DIGITRADIO 370 CD IR?
To improve poor DAB+/FM reception on your TechniSat Radio, fully extend the antenna and try changing the position of the antenna or the DIGITRADIO 370/371 CD IR.
What to do if there is no sound from AUX input on TechniSat DIGITRADIO 370 CD IR Radio?
If you're not getting any sound from the external input (AUX) on your TechniSat Radio, check the following: * Ensure the device is connected correctly. * Verify that AUX has been selected as the input source. * Confirm that playback has started on the external device and the output volume is set appropriately.
What to do if TechniSat DIGITRADIO 370 CD IR Radio cannot be operated?
If your TechniSat Radio cannot be operated, disconnect it from the power supply and then reconnect it.
What to do if the display of TechniSat DIGITRADIO 370 CD IR does not switch on?
If the display on your TechniSat Radio does not switch on, try disconnecting the device from the power supply and then reconnecting it.
Why TechniSat DIGITRADIO 370 CD IR has distorted sound?
If you hear distorted sound from your TechniSat Radio, it might be caused by a mobile phone or other device emitting disruptive radio waves nearby. Try removing the mobile phone or device from the vicinity of the radio.
Why does TechniSat DIGITRADIO 370 CD IR automatically switch to standby?
The auto standby function switches the TechniSat Radio device to standby after approximately 15 minutes if there is no playback in DAB, CD, Bluetooth, or USB modes.
What to do if TechniSat DIGITRADIO 370 CD IR Radio has operational malfunctions?
If you experience other operational malfunctions, loud noises, or a malfunctioning display with your TechniSat Radio, it may be due to malfunctioning electronic components. Remove the mains plug, keep the device separated from the power source for about 10 seconds, and then reconnect the device.
What to do if CD is not detected on TechniSat Radio?
If your TechniSat Radio is not detecting a CD or MP3 CD, or if the music skips during playback, carefully clean the underside of the CD or try using another CD.
General| FM band range | 87.5 - 108 MHz |
|---|---|
| Preset stations | Yes |
| Supported radio bands | DAB+, FM, PLL, UHF |
| Preset stations quantity | 40 |
| Internet radio services supported | Spotify |
| Bluetooth version | 4.2 |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 5 - 90 % |
| Apple docking | - |
| Headphone connectivity | 3.5 mm |
| USB 2.0 ports quantity | 1 |
| Type | Home audio mini system |
| Product color | Black |
| Volume control | Rotary |
| Display type | TFT |
| Disc types supported | CD, CD-RW |
| Audio formats supported | MP3 |
| RMS rated power | 10 W |
| Number of speakers | 2 |
| Power source | AC |
| Input voltage | 230 V |
| Input frequency | 50 Hz |
Weight and Dimensions| Depth | 210 mm |
|---|---|
| Width | 350 mm |
| Height | 120 mm |
| Weight | 2750 g |
| Package depth | 280 mm |
| Package width | 425 mm |
| Package height | 175 mm |
| Package weight | 3540 g |
Details the functions and buttons of the remote control for operation.
Defines the primary functions and intended application of the DIGITRADIO 370/371 CD IR.
Details crucial safety guidelines to prevent risks, device damage, and environmental impact.
Explains how to properly position the telescopic antenna for optimal DAB+/FM reception.
Provides instructions and warnings for safely connecting the device to a power source.
Details the procedure for powering on the DIGITRADIO 370/371 CD IR.
Explains how to put the device into standby mode.
Guides users on how to switch between different input sources like DAB, FM, Internet radio, etc.
Explains how to control the audio volume level and use the mute function.
Guides users on how to navigate and operate the device's menu system for settings and functions.
Guides users through the first-time setup process, including language, time, and network configuration.
Details how to tune into DAB+ stations and perform a full scan for available channels.
Instructions on how to activate and use the FM radio function.
How to activate the Bluetooth function on the device to prepare for pairing.
Step-by-step guide to connect smartphones or tablets via Bluetooth.
Instructions for operating the CD player, including inserting, playing, pausing, and stopping discs.
Details how to play, pause, stop, and skip tracks from a connected USB device.
Step-by-step instructions for programming alarm times, sources, and volumes.
Instructions on how to stop an active alarm once it sounds.
Initiates the network wizard to search for and connect to available WLAN networks.
Connects to WLAN using the WPS button for a simplified setup.
Manually configures network settings like SSID and password.
Guides on manually inputting the current date and time.
Restores the device to its original factory configuration, deleting all saved stations.
Lists common symptoms and their possible causes and remedies for device issues.
Lists detailed technical data, frequencies, power supply, and dimensions of the device.
To Next Page