To Next Page
R
Robert SmithAug 15, 2025
Why my TechniSat Radio won't turn on?
- JJodi BaxterAug 15, 2025
If your TechniSat Radio is not turning on, the most likely cause is a power supply issue. Check the power supply to ensure the device is receiving power.
Why my TechniSat Radio won't turn on?
If your TechniSat Radio is not turning on, the most likely cause is a power supply issue. Check the power supply to ensure the device is receiving power.
What to do if my TechniSat DIGITRADIO 370 CD BT Radio has Bluetooth connection issues?
To improve a bad Bluetooth connection and reduce dropouts on your TechniSat Radio, ensure that you are within the maximum Bluetooth range of 10 meters.
How to improve DAB/FM reception on TechniSat DIGITRADIO 370 CD BT?
To improve poor DAB+/FM reception on your TechniSat Radio: - Fully extend the antenna. - Change the position of the antenna or the radio.
Why is there no sound from AUX input on my TechniSat Radio?
If you're not getting any sound from the external input (AUX) on your TechniSat Radio, consider the following: 1. Ensure the device is correctly connected. 2. Verify that AUX has been selected as the input source. 3. Confirm that playback has started on the external device and the output volume is appropriately set.
What to do if my TechniSat DIGITRADIO 370 CD BT is not working?
If your TechniSat Radio is not responding, try disconnecting it from the power supply and then reconnecting it.
How to fix a TechniSat DIGITRADIO 370 CD BT display that won't turn on?
If the display on your TechniSat Radio is not switching on, disconnect the device from the power supply and then reconnect it.
Why does my TechniSat DIGITRADIO 370 CD BT Radio automatically turn off?
The auto standby function on your TechniSat Radio switches the device to standby after approximately 15 minutes if there is no playback in DAB, CD, Bluetooth, or USB modes. In AUX mode, the radio switches to standby after 4 hours.
Why is the sound distorted on my TechniSat DIGITRADIO 370 CD BT Radio?
If you are experiencing distorted sound from your TechniSat Radio, it might be due to interference from nearby devices emitting radio waves, such as mobile phones. Try removing these devices from the vicinity of the radio.
What to do if my TechniSat DIGITRADIO 370 CD BT Radio CD player skips or doesn't read discs?
If your TechniSat Radio is not detecting a CD or MP3 CD, or if the music skips during playback: - Carefully clean the underside of the CD. - Try using another CD.
What to do for operational malfunctions of TechniSat Radio?
If you experience operational malfunctions, loud noises, or a malfunctioning display with your TechniSat Radio, the electronic components in the device may be malfunctioning. To resolve this, remove the mains plug, keep the device separated from the power source for about 10 seconds, and then reconnect it.
Steps required to get the device ready for operation.
Guidance on receiving DAB+ radio stations.
Information on FM radio reception and RDS data display.
Steps to enable and activate Bluetooth connectivity.
Procedure for connecting a Bluetooth-enabled device.
Instructions for inserting, playing, and controlling CD playback.
How to manage music playback from a USB storage device.
General| Thermometer | - |
|---|---|
| Antenna type | External |
| MP3 playback | Yes |
| Product color | White |
| Volume control | Rotary |
| On Screen Display (OSD) languages | DEU, ENG, FRE, ITA |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 5 - 90 % |
| USB 2.0 ports quantity | 1 |
| Display type | TFT |
| Display diagonal | 2.4 \ |
| Radio type | Personal |
| Tuner type | Analog & digital |
| FM band range | 87.5 - 108 MHz |
| DAB band range | 174 - 240 MHz |
| Supported radio bands | DAB+, FM |
| Preset stations quantity | 40 |
| Number of built-in speakers | 2 |
| RMS rated power | 10 W |
| Power source | AC |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
Weight and Dimensions| Width | - mm |
|---|
