TechniSat DIGITRADIO 370 CD BT

57
DE
EN
NL
FR
PL
In Bluetooth mode:
[Pairing Status] and [Date].
In CD/USB mode (only where the relevant data is available):
[Date], [Track], [Album], [Artist], [Weekday].
4.4.5.2 Slideshow
Some DAB+ broadcasters broadcast additional information such as the album cover
of the current track, adverts or weather information. The size of the window can be
set using the ENTER or TUNING/ENTER buon.
5 Menu operation
All the DIGITRADIO 370/371 CD BT functions and seings are accessed via the
menu. Menu navigation takes place using the MENU, ,/ and ENTER buons on
the remote control. The menu is divided into submenus and, depending on the
selected source (DAB+ or FM), contains dierent menu items or functions which can
be enabled. To open the menu, simply press the MENU buon briefly. To change
to submenus, first of all press the / buons to display a submenu, then press
the ENTER buon to retrieve the submenu. An asterisk (*) highlights the current
selection.
To close the menu: Press the MENU buon several times (depending on which
submenu you are in) until the current radio channel is displayed again.
Seings are not saved until the ENTER buon is pressed. If the MENU buon is
pressed instead, seings are not accepted or saved (the MENU buon in this
case acts as a “Back” buon and you exit the menu).
The functions and buons to be pressed are shown in bold in this instruction
manual. Displays in [square brackets].
Some text (e.g. menu items, station information) may be too long to show on
the display. These will be then shown as running text shortly thereaer.
Advice on using the device:
The TUNING/ENTER knob can be either turned or pressed.
Press the TUNING/ENTER knob to Confirm/ENTER/Snooze.
Turn the TUNING/ENTER knob for P+/- or  / / track search.
The following operations are all explained using the buons on the remote
control. Press the relevant buons on the device if you want to carry out the
function on the device.