65
DE
EN
NL
FR
PL
If you create audio CDs, observe the legal requirements and do not breach
third-party copyrights.
The device can play CDs with MP3 data (.mp3) and normal audio CDs (.wav).
Do not use any other extensions such as *.doc, *.txt, *.pdf, etc. if audio files are
being converted to MP3.
Given the variety of dierent encoder soware, it cannot be guaranteed that
every MP3 file can be played without a problem.
In the event of tracks/files being faulty, playback will continue with the next
track/file.
When burning the CD, it is worth doing so at low speed and creating the CD
as a single session and finalised.
9.2 The discs you can use
The CD player is compatible with CD, CD-R/RW and MP3 CD media.
If you transport the device, remove the discs from the drive. This prevents
damage to the CD player and the disc.
The playback quality with MP3 CDs depends on the bit rate seing and the
burning soware used.
9.3 Playing CDs
> Switch to CD player mode by pressing the MODE buon.
> [CD] is shown in the display.
> Press the EJECT buon to open the CD tray.
> Insert the CD with the labelled side facing upwards. Ensure that the CD is not
positioned at an angle.
> Press the EJECT buon to close the CD tray again.
> The data on the CD is scanned. [Reading] appears in the display. Playback
then begins with the first track (audio CD) or the first track in the first folder
(MP3 CD).
Do not perform any operation until the CD content has been completely read,
to ensure that all the required information on the CD has been read. With MP3
CDs in particular, this process can take some time.
When inserting/removing the CD, please hold it by the edge.
> By pressing the Play/Pause buon, you can pause playback (the playing
time appears in the display), or continue playback by pressing it again.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
