TechniSat DIGITRADIO 370 CD BT

62
With the All Stations seing, the scan stops automatically upon detecting
each available station. This can result in weak stations being played with
background noise.
> Press the ENTER buon to save.
7.6 Audio seings
> Press the MENU buon and select the [Audio seings] > [Audio seing]
item.
> Use / to select the [Stereo available] or [Mono only] item to play back in
stereo or only in mono sound when the FM reception is weak.
> Confirm the seing by pressing the ENTER buon.
Alternatively you can also press the Mono/Stereo buon (8) on the remote
control to switch directly.
7. 7 Saving FM stations to a memory slot
The station memory can save up to 20 stations in the FM range.
> First set the desired station frequency (Section 7.3, 7.4)
> In order to store this station in a memory slot, hold down the PRESET buon
while playing until [Save channel] appears on the display. Then use the /
buons to select a favourites memory slot (1 - 20). Press the ENTER buon to
save.
> Repeat this process to save additional stations.
You can also save stations to one of the One-Touch buons (1 - 10) by
holding down the corresponding buon a lile longer (0 buon = 10).
7.8 Retrieving FM stations from a memory slot
> To retrieve a station that you have stored in the FAV memory slots, briefly
press the PRESET buon and select a station slot (1 - 20) using the /
buons. Press the ENTER buon to play the station.
If no station is saved in the selected station slot, [(empty)] appears on the
display.
Alternatively, the corresponding One-touch buon (1 - 10) on the remote
control can be used.