TechniSat DIGITRADIO 370 CD BT

69
DE
EN
NL
FR
PL
10.3 Quick search
While the track is playing, you can perform a quick search forwards or backwards to
find a specific section.
> Hold down the Previous Track or Next Track buons to quickly skip
forwards or backwards within a track for as long as the buon is held down.
10.4 Repeat function
You can select whether a track, the entire folder/album or all of the tracks are to be
repeated.
> Press the Repeat buon multiple times.
The selected mode appears on the display (Repeat Track, Repeat Album,
Repeat All).
> To switch the function o again, press the Repeat buon again until the
repeat icon on the display disappears.
10.5 Random playback
With the random generator, the tracks can be played back in a randomly mixed
order.
> If you press the SHUFFLE buon while playing, the shue icon appears
on the display.
> To switch the function o again, press the SHUFFLE buon again.
10.6 Play intro
When Play intro is enabled, only the first 10 seconds of each track are played.
> Press the INTRO buon to stop playing intros.
> Press the buon once more to disable the function again.
10.7 Programming function
With the programming function, you can play up to 20 tracks on a USB medium in
an order determined by you.
You can only undertake the programming if there is a USB medium aached
and the device is in stop mode.
> Press the PRESET buon on your remote control.
> The track number (T) now flashes in the display. [P01] appears to the le of
this. P01 is the first programming slot. Any tracks you want can then be set up
in sequence in the programming slots.
> Use the Previous track or Next track to select the first track to be
programmed.
> Press the ENTER buon to accept the track.