70
> The second programming slot (P02) is then active. Proceed as described
above to save a track to programming slot 2. Do this to save the tracks you
want to all the programming slots.
> Press the Play/Pause buon to play the programmed tracks.
Press Stop, change the source or remove the USB medium to delete the
programming.
11 Audio input
You can play sound on an external device via theDIGITRADIO 370/371 CD BT speaker.
> Connect the external device to the AUDIO IN port (17, 3.5 mm jack) on the
back of the device.
> Use the MODE buon to select the audio input. [AUX In] appears on the
display.
The playback is controlled on the external device.
Do not set the volume too low to prevent interference.
In AUX In mode, the device remains switched on - even if the aached audio
source is not providing a signal - and switches to standby aer 4 hours.
The USB port on the DIGITRADIO 370/371 CD BT can also be used to charge
or power external devices. The maximum charging current is DC 5 V, 1 A.
12 Other functions
12.1 Sleep timer
The sleep timer automatically switches the DIGITRADIO 370/371 CD BT to Standby
aer the set time.
> Press the MENU buon and use the / buons to select the [Sleep] item.
> Press the ENTER buon.
> Use / to select a period aer which the DIGITRADIO 370/371 CD BT should
switch o. You can choose between O, 15, 30, 45, 60 and 90 minutes.
> Press ENTER to apply the seing.
Alternatively the SLEEP buon (17) can be used. Press it repeatedly to
scroll through the times.
When the sleep timer is active, a moon symbol appears on the display
showing the time still available.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
