TechniSat DIGITRADIO 10 IR User Manual

138
15.2.2 Switching o the alarm aer being woken
> Press the On/Standby buon on the remote control to switch the alarm o.
If you want to activate the snooze function, press the OK buon repeatedly
when an alarm is active.
15.3 Equaliser
You can use the equaliser to adjust the sound according to your preferences.
> Press the MENU buon and use the / buons to select the [Sound
Seings] > [Equaliser] item.
> Press the OK buon.
> Use the / buons to select either [Treble] to adjust the treble, or [Bass]
to adjust the bass. Then press OK.
> Use the / keys to set a value between -7 and +7. Press the OK buon to
apply the seing.
The equaliser can also be accessed using the EQ buon (15).

TechniSat DIGITRADIO 10 IR Specifications

General

Radio type	Internet
Tuner type	Digital
FM band range	87.5 - 108 MHz
DAB band range	174 - 240 MHz
Supported radio bands	DAB+, FM
Preset stations quantity	60
Equalizer	Yes
RMS rated power	- W
Built-in speaker(s)	No
Display type	TFT
Display diagonal	2.8 \
Display resolution	240 x 320 pixels
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version	4.1
Coloration	Monochromatic
Thermometer	-
Antenna type	External
Product color	Black, Silver
Internet radio services supported	Spotify
On Screen Display (OSD) languages	DAN, DEU, DUT, ENG, FIN, FRE, ITA, NOR, POL, POR, SWE
Power source	AC/DC
AC input voltage	230 V
DC input voltage	5 V
AC input frequency	50 Hz
Power consumption (standby)	0.72 W
Power consumption (typical)	1.4 W
Clock mode	24h
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	5 - 90 %

Weight and Dimensions

Width	- mm