What to do if TechniSat DIGITRADIO 1990 Radio has distorted sound?
If you are experiencing distorted sound on your TechniSat Radio, it might be due to disruptive radio waves emitted by a nearby mobile phone or other device. To resolve this, remove the mobile phone or device from the vicinity of the radio.
Why is there no sound on my TechniSat DIGITRADIO 1990?
If your TechniSat Radio is not producing any sound, first, increase the volume. If you are using headphones, remove the headphone jack to listen via the speakers. Also, ensure that the correct source has been selected.
How to fix TechniSat DIGITRADIO 1990 Radio when no radio stations are being received?
If your TechniSat Radio is not receiving any radio stations, try adjusting the antenna's orientation. Also, verify whether you have selected DAB or FM mode.
How to fix TechniSat Radio display when it does not switch on?
If your TechniSat Radio's display does not switch on, turn the device off, remove the mains plug, reinsert it, and then switch the device back on. Also, check the display brightness setting.
Why does my TechniSat Radio have weak or poor sound quality?
If the sound from your TechniSat Radio is weak or of poor quality, it could be due to interference from other devices like televisions. Try moving the radio further away from these devices. Also, ensure that the antenna is fully extended and correctly oriented to improve reception.
What to do if TechniSat Radio cannot be switched on?
If your TechniSat Radio cannot be switched on, connect the mains lead to the radio and insert new batteries.
How to improve DAB signal on TechniSat Radio?
If your TechniSat Radio is not receiving a DAB signal, first check if DAB reception is available in your region. Then, try realigning the antenna and attempt to receive other stations.
What to do if TechniSat DIGITRADIO 1990 has operational malfunctions?
If your TechniSat Radio experiences other operational malfunctions, loud noises, or a malfunctioning display, it could be due to malfunctioning electronic components. Remove the mains plug, keep the device separated from the power source for approximately 10 seconds, and then reconnect the device.
What to do if TechniSat Radio CD or MP3 CD is not detected?
If your TechniSat Radio is not detecting a CD or MP3 CD, or if the music skips during playback, gently clean the underside of the CD. If the issue persists, try using a different CD.
How to fix malfunction with Bluetooth connection on TechniSat DIGITRADIO 1990 Radio?
If you are experiencing malfunctions with reception via a Bluetooth connection on your TechniSat Radio, ensure that the two devices are within a maximum of 8 meters of each other. Try limiting the distance between the devices.
Diagrams showing the top and front of the DIGITRADIO 1990 with labeled controls.
Diagrams showing the side and rear of the DIGITRADIO 1990 with labeled ports and connections.
Details the device's purpose and intended applications.
Guidelines for safe operation, hazard prevention, and crucial warnings.
Contains EU Declaration of Conformity, liability disclaimers, and trademark information.
Information on warranty, technical support hotline, and repair service procedures.
Lists all included accessories with the DIGITRADIO 1990 unit.
Highlights key functionalities like DAB+/FM reception, CD, USB, and Bluetooth.
Guidance on optimizing radio reception by adjusting the telescopic antenna.
Steps for connecting the device to a power source via the mains cable.
Details on using the device with batteries, including compartment and battery type.
Instructions for switching the DIGITRADIO 1990 on and off.
How to navigate the device's menu system using control buttons.
How to control the audio volume using the volume up and down buttons.
Guidance on connecting headphones, safety warnings, and speaker muting.
Overview of available playback sources: DAB+, FM, CD, USB, Audio In, Bluetooth.
Explanation of the digital radio technology and its benefits.
How to select DAB+ mode and perform automatic or manual station scans.
Instructions for selecting, storing, retrieving, and deleting DAB+ stations.
Customizing display information and using DRC for volume adjustment in DAB+ mode.
Procedure to remove stations that are no longer received from the station list.
How to manually tune FM frequencies and use RDS information.
Steps to automatically scan and find FM radio stations.
Instructions for saving, retrieving, and deleting FM stations from memory.
Customizing display and audio output settings for FM radio.
How to switch to CD mode and load audio or MP3 discs.
Controls and playback modes for standard audio CDs (play, pause, skip, repeat, shuffle).
Playback controls and modes for MP3 CDs, including folder navigation and ID3 tags.
Guide to creating a custom playback sequence for audio and MP3 CDs.
How to switch the device into USB playback mode.
Details on playing MP3 tracks from USB storage devices.
How to switch the device into Bluetooth pairing mode.
Steps to connect the DIGITRADIO 1990 to other Bluetooth-enabled devices.
How to connect and play audio from external devices using the AUX IN socket.
How to set the device to automatically turn off after a set period.
Guide to programming the internal alarm, including setting time, source, and volume.
How to select different sound presets for audio playback.
Adjusting display brightness and manually setting the device's clock.
Selecting device language and checking the current software version.
Instructions to restore the device to its original factory state, clearing all settings.
Solutions for common issues like no radio stations or poor DAB signal.
Troubleshooting steps for device malfunctions, sound issues, and display problems.
General| Radio type | Portable |
|---|---|
| Tuner type | Analog & digital |
| FM band range | 87.5 - 108 MHz |
| DAB III band range | 174 - 240 MHz |
| Supported radio bands | DAB+, FM |
| Radio Data System (RDS) | Yes |
| Preset stations quantity | 60 |
| Projection | - |
| Thermometer | No |
| Antenna type | External |
| Product color | Black, Grey |
| On Screen Display (OSD) languages | DAN, DEU, ENG, FRE, ITA, NOR, SWE |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 5 - 90 % |
| Bluetooth version | 4.2 |
| Headphone outputs | 1 |
| Headphone connectivity | 3.5 mm |
| Display type | LCD |
| RMS rated power | 3 W |
| Number of built-in speakers | 2 |
| Power source | AC |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 0.8 W |
| Power consumption (typical) | 18 W |
Weight and Dimensions| Width | - mm |
|---|
To Next Page