TechniSat DIGITRADIO 1990 User Manual

16
- Access menu - Keep the INFO/MENU/MEMORY buon (5)
pressed.
- Navigate through the menu - TUNING/SKIP buon (6, 7).
- Save/Confirm changes - ENTER/STOP/SLEEP buon (8).
- Exit menu - Keep the INFO/MENU/MEMORY buon (5)
The currently selected function/option is shown in square brackets < >. The
currently active function/option is shown with an asterisk *.
> To exit the menu, wait for a short time or press the INFO/MENU/MEMORY
buon.
8.3 Adjusting the volume
To change the volume, use the buons marked Volume on the device. To increase the
volume, press VOLUME + (11); to reduce it, press VOLUME - (10).
8.4 Using headphones
WARNING!
Do not listen to the radio at high volume with headphones. Doing so can
cause permanent hearing impairment. Turn down the radio volume to the
lowest volume before using headphones.
When you aach headphones (not in the scope of delivery), the device's speakers are
muted.
> Only use headphones with a 3.5 mm stereo jack plug.
> Insert the headphone plug into the headphone jack (21) on the side of the
device. Sound is now played exclusively through the headphones.
> If you would wish to use the speakers again, unplug the headphones from the
headphone jack on the device.
8.5 Playback modes
Your device has dierent possible reception routes for playback. These are described
below.
> To switch between the individual modes, briefly press the MODE/CLOCK
buon (3).
The currently active playback mode is shown in the display.
The modes are:
DAB+ radio, FM radio, CD, USB, Audio In, Bluetooth.

TechniSat DIGITRADIO 1990 Specifications

General

Radio type	Portable
Tuner type	Analog & digital
FM band range	87.5 - 108 MHz
DAB III band range	174 - 240 MHz
Supported radio bands	DAB+, FM
Radio Data System (RDS)	Yes
Preset stations quantity	60
Projection	-
Thermometer	No
Antenna type	External
Product color	Black, Grey
On Screen Display (OSD) languages	DAN, DEU, ENG, FRE, ITA, NOR, SWE
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	5 - 90 %
Bluetooth version	4.2
Headphone outputs	1
Headphone connectivity	3.5 mm
Display type	LCD
RMS rated power	3 W
Number of built-in speakers	2
Power source	AC
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.8 W
Power consumption (typical)	18 W

Weight and Dimensions

Width	- mm