TechniSat DIGITRADIO 1990 User Manual

29
> Use the TUNING/SKIP buons (6, 7) to select one of the available languages
and confirm with ENTER/STOP/SLEEP (8).
15.7 Soware version
> Select DAB+ or FM radio mode.
> Open the main menu by holding down the INFO/MENU/MEMORY buon (5)
and use the TUNING/SKIP buons (6, 7) to select the <SW Version> item.
Press the ENTER/STOP/SLEEP buon (8).
> The soware version currently installed will now be displayed.
15.8 Factory seings
If you want to reset the DIGITRADIO 1990 to the delivery status, proceed as follows:
Doing so will delete all seings, stations and favourites.
1. Select DAB+ radio mode.
2. Open the CD compartment cover.
3. Hold down the Folder +/2 buon (16) on the front until [Restart] appears in
the display.
16 Cleaning the device
WARNING Electric shock!
To prevent the risk of an electric shock, you must not clean the device using a
wet cloth or under running water. Before cleaning, disconnect from the mains
and remove any inserted baeries.
You may not use scouring pads, scouring powder and solvents such as alcohol
or petrol.
> Clean the housing using a so, moist cloth.
17 Troubleshooting
17.1 Problems with the radio
Symptom Possible cause/remedy
No radio stations are being received. Change the orientation of the antenna
if necessary. Check whether DAB
or FM mode has been selected.
No DAB signal is being received. Check whether DAB reception is possible
in your region. Realign the antenna. Try
to receive other stations.

TechniSat DIGITRADIO 1990 Specifications

General

Radio type	Portable
Tuner type	Analog & digital
FM band range	87.5 - 108 MHz
DAB III band range	174 - 240 MHz
Supported radio bands	DAB+, FM
Radio Data System (RDS)	Yes
Preset stations quantity	60
Projection	-
Thermometer	No
Antenna type	External
Product color	Black, Grey
On Screen Display (OSD) languages	DAN, DEU, ENG, FRE, ITA, NOR, SWE
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	5 - 90 %
Bluetooth version	4.2
Headphone outputs	1
Headphone connectivity	3.5 mm
Display type	LCD
RMS rated power	3 W
Number of built-in speakers	2
Power source	AC
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.8 W
Power consumption (typical)	18 W

Weight and Dimensions

Width	- mm