TechniSat DIGITRADIO 1990 User Manual

18
> Open the main menu by holding down the INFO/MENU/MEMORY buon (5)
and use the TUNING/SKIP buons (6, 7) to select the <Manual Seing> item.
Press the ENTER/STOP/SLEEP buon (8).
> Use the TUNING/SKIP buons (6, 7) to select a channel (5A to 13F) and then
press the ENTER/STOP/SLEEP buon (8). The signal intensity will now be
shown in the display. If a DAB+ station is being received on a channel, the
station ensemble name is displayed. The antenna can now be aligned to the
maximum signal intensity.
Stations with a signal intensity below the required minimum signal intensity
are not transmiing a strong enough signal. Readjust the antenna position if
required.
If there are stations on the set frequency or channel that have not yet been
stored in the station list, they will now also be saved.
9.4 Selecting stations
> By pressing the TUNING/SKIP buons (6, 7), the station list can be accessed
and you can switch between the available stations. Press the ENTER/STOP/
SLEEP buon (8) to play the station.
9.5 Storing DAB+ stations on a memory slot
The programme memory can save up to 30 stations in the DAB+ range.
> Now select the desired station.
> In order to store this station on a memory slot, hold down the 3+ (18) buon
during playback until [Save P3] appears in the display. Then use the TUNING/
SKIP buons (6, 7) to select a favourites memory slot (1-30). Press the ENTER/
STOP/SLEEP buon (8) to save.
> Repeat this process to save additional stations.
You can also save stations to one of the One-Touch buons (1 or 2- 15, 16)
by holding down the corresponding buon for a bit longer.
9.6 Retrieving DAB+ stations from a memory slot
> To retrieve a station that you have already stored in the favourites memory,
briefly press the 3+ (18) buon and select a station slot (1 - 30) using the
TUNING/SKIP buons (6,7). Press the ENTER/STOP/SLEEP buon (8) to play
the station.
If no station is saved on the selected station slot, [(empty)] appears in the
display.
Alternatively One-Touch buon 1 or 2(15, 16) can also be used.

TechniSat DIGITRADIO 1990 Specifications

General

Radio type	Portable
Tuner type	Analog & digital
FM band range	87.5 - 108 MHz
DAB III band range	174 - 240 MHz
Supported radio bands	DAB+, FM
Radio Data System (RDS)	Yes
Preset stations quantity	60
Projection	-
Thermometer	No
Antenna type	External
Product color	Black, Grey
On Screen Display (OSD) languages	DAN, DEU, ENG, FRE, ITA, NOR, SWE
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	5 - 90 %
Bluetooth version	4.2
Headphone outputs	1
Headphone connectivity	3.5 mm
Display type	LCD
RMS rated power	3 W
Number of built-in speakers	2
Power source	AC
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.8 W
Power consumption (typical)	18 W

Weight and Dimensions

Width	- mm