26
> Select Bluetooth mode as described. [BT Connection] now flashes in the
display if no device has yet been paired with the DIGITRADIO 1990.
> Open the Bluetooth scan for other devices on your external device.
> In the list of discovered devices, select DIGITRADIO 1990 by tapping it.
If required, enter a password, or use "0000" (4 zeros).
> A confirmation tone is heard on the DIGITRADIO 1990 when a successful
connection is made.
> Start playing music on your external device...
To pair with another device aer successful pairing, hold down the SCAN/Play/
Pause/PAIR buon (9) to launch the pairing mode.
14 AUDIO IN
External devices such as smartphones can be connected with the DIGITRADIO
1990 via the analogue audio input AUX IN (20). Music can then be played on the
DIGITRADIO 1990 via the headphone socket or audio output of your external device.
14.1 AUX IN playback
> Press the MODE buon until [AUDIO IN] appears in the display.
> Connect an audio cable (3.5 mm jack plug) to the audio output of your
external device and insert it into the AUX IN socket (20) on the side of the
device.
> To set the volume to the optimum level, use both the volume control on
the DIGITRADIO 1990 and on the connected device. Set the volume on the
connected device as high as possible and then regulate the volume on the
DIGITRADIO 1990. If the volume on the connected device is set too low, you
will probably hear interference in the sound on the DIGITRADIO 1990.
If no music is played for 4 hours, the DIGITRADIO 1990 automatically switches
to standby mode.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
