TechniSat DIGITRADIO 10 IR User Manual

116
9.2.2 Selecting stations
> By pressing the P+ or P- buons, the station list can be called up and you can
switch between the available stations.
Depending on the seing under MENU > [Scan seings] > [Change channel],
the OK buon must then be pressed to play the selected station (alternatively:
Change Channel > List) or the station will be played automatically
(alternatively: Change channel > Channel).
9.2.3 Storing DAB+ stations in a memory slot
The programme memory can save up to 30 stations in the DAB+ range.
> First select the desired station (see Section 9.2.2).
> In order to store this station in a memory slot, hold down the FAV buon
while playing until [Save channel] appears on the display. Then use the /
buons to select a favourites memory slot (1 - 30). Press the OK buon to
save.
> Repeat this process to save additional stations.

TechniSat DIGITRADIO 10 IR Specifications

General

Radio type	Internet
Tuner type	Digital
FM band range	87.5 - 108 MHz
DAB band range	174 - 240 MHz
Supported radio bands	DAB+, FM
Preset stations quantity	60
Equalizer	Yes
RMS rated power	- W
Built-in speaker(s)	No
Display type	TFT
Display diagonal	2.8 \
Display resolution	240 x 320 pixels
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version	4.1
Coloration	Monochromatic
Thermometer	-
Antenna type	External
Product color	Black, Silver
Internet radio services supported	Spotify
On Screen Display (OSD) languages	DAN, DEU, DUT, ENG, FIN, FRE, ITA, NOR, POL, POR, SWE
Power source	AC/DC
AC input voltage	230 V
DC input voltage	5 V
AC input frequency	50 Hz
Power consumption (standby)	0.72 W
Power consumption (typical)	1.4 W
Clock mode	24h
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	5 - 90 %

Weight and Dimensions

Width	- mm