TechniSat DIGITRADIO 10 IR

112
8 Initial set-up
Aer switching on the DIGITRADIO 10 IR for the first time, the initial set-up wizard
starts.
Seings can all be changed at any time in the future.
> To launch the initial set-up wizard, use / on the remote control to select
the [YES] field and press the OK buon.
> Use / to select the operating language and confirm with OK.
> In the next step you can select the time format. Select the desired seing [12]
or [24] and press the OK buon to move on to the next step.
> Here it is possible to select which source (DAB+, FM or the Internet) the
DIGITRADIO 10 IR uses to obtain and update the time and date.
If you have selected Update from the NET, you must then select the time
zone so that the time is displayed correctly. Proceed to specify whether
summertime or wintertime is applicable at the time of seing.