TechniSat DIGITRADIO 10 IR

148
Display
Here you can select the additional information display (depending on the source
currently selected).
> Use / to select the [Display] item. Selectthe additional information and
press the OK buon to save.
Picture size
Under Picture size, the picture size for the slideshow for DAB+ stations can be
selected.
> Use / to select the [Picture size] item. Selecta picture size and press the
OK buon to save.
Brightness
> Use / to select the [Brightness] item.
[Operation] regulates brightness in the normal operating status. You can
choose from the [High], [Medium] and [Low] brightness intensities. Use /
to select the brightness level and press OK to save.
[Standby] regulates the brightness in standby mode. You can choose from
the [High], [Medium] and [Low] brightness intensities. Use / to select a