TechniSat DIGITRADIO 10 C - Page 122

122
8.3 Automatic station scan
> Press the SCAN buon to automatically search for the next station with
sucient signal intensity.
If a FM station with sucient signal strength is found, the scan stops and the
station is played. If an RDS station is being received, the station name appears
and, possibly, the radio text.
Please use the manual station scan for seing weaker stations.
8.4 Manual station scan
> Press the  /  buons repeatedly to set the desired stations or frequency.
The display shows the frequency in increments of 0.05 MHz.
8.5 Scan seings
In this menu item it is possible to set the sensitivity of the scan.
> Press the MENU buon and select the [Scan Seings] item.