5.3
Audio connection to stereo system, active loudspeaker
>
Connect the DIGITRADIO 11 IR via the analogue audio output (5), e.g. to the
AUDIO-IN input of a stereo system or AV amplifier. Use the supplied audio
connection cable for this (a special cable may be required, depending on the AV
amplifier input).
>
If your AV amplifier has an optical digital input, you can connect the
DIGITRADIO 11 IR to the amplifier via the optical digital output S/PDIF (4).
5.4
Connecting the power supply unit
WARNING!
Do not touch the mains plug with wet hands, risk of electric shock.
Blow!
ATTENTION!
Lay the mains cable so that nobody can trip over it and the power supply unit can
be reached quickly at any time to disconnect the appliance from the mains.
To Next Page
Loading...
