TechniSat DIGITRADIO 20 CD - 5 General Device Functions; 5.1 Powering On and Off; 5.2 Adjusting Volume

5 General device functions
5.1 Switching on the device
> Use the (On/Standby) buon on the device to switch the device on or
switch it to standby.
Aer switching on for the first time, or aer reseing to the factory seings,
automatic device set-up is launched. A scan is performed to locate DAB+
stations, and the current time is searched for and adopted.
5.2 Adjusting the volume
> Adjust the volume using the VOLUME&MUTE knob. The set volume is shown
on the display. Rotate to the right to increase the volume and to the le to
decrease it.
> Press the VOLUME&MUTE knob to mute the sound (Mute). [MUTE ON]
appears on the display.
5.3 Retrieving displays
Various information is shown on the display such as selected source, time, day of the
week, track, etc.
> By repeatedly pressing the INFO buon during playback, the following
information can be seen and scrolled through:
In DAB mode:
DLS: continuous text with additional information which is sometimes provided
by the stations, track, channel, frequency, artist, signal errors, reception, bit
rate, sound format, genre, time, ensemble/multiplex (group name), date.
In FM mode:
RT radio text (if broadcast), time, genre, date, frequency, sound format.
5.4 Switching o the device
> Use the (On/Standby) buon on the device to switch the device back to
standby. If you would like to disconnect it from the power supply completely,
remove the power supply unit from the socket.
6 Menu operation
All the DIGITRADIO 20 CD functions and seings are accessed via the menu. The
menu navigation takes place using the MENU buons and the SCROLL&SELECT
knob. The menu is divided into submenus and, depending on the mode (DAB+, FM,
AUX or CD), contains dierent menu items or functions which can be enabled. To
open the menu, simply press the MENU buon briefly.
18