TechniSat DIGITRADIO 20 CD - 8 FM Mode Operations; 8.1 Switching on FM Radio; 8.3 Automatic FM Scan; 8.7 Storing FM Stations

8 FM mode
8.1 Switching on FM radio mode
> Press the MODE buon until [FM] appears on the display.
> [FM] is shown on the display.
[No radio text]
When switching on for the first time, the frequency 87.50 MHz is set.
If you have already set or saved a station, the radio plays the last station set.
In the case of RDS stations, the station name appears.
To improve reception, readjust the dipole antenna (Section 4.3.3).
8.2 FM reception with RDS information
RDS is a procedure for broadcasting additional information via FM stations.
Broadcasters with RDS broadcast their station name or the programme type, for
example. This is shown on the display. The device can show the RDS information RT
(Radio text), PS (Station name), PTY (Programme type).
8.3 Automatic station scan
> Press the SCAN buon to automatically search for the next station with
sucient signal intensity.
If a FM station with sucient signal intensity is found, the scan stops and the
station is played. If an RDS station is being received, the station name appears
and, possibly, radio text.
Please use the manual station scan for seing weaker stations.
8.4 Manual station scan
> Rotate the SCROLL&SELECT knob to the right or le to set the desired station
or frequency.
The display shows the frequency in steps of 0.05 MHz.
23
EN
FR
IT
NL
NW
DK
PL
CZ
SK