TechniSat DIGITRADIO 21 IR

65
DE
EN
15.4.4 Seing the time zone
To update the time via the Internet, it is important to configure the correct time zone.
> In the [System Seings] submenu, select [Time/Date] > [Set Time Zone] and
press the SCROLL/SELECT knob.
> Use the SCROLL/SELECT knob to select a time zone and press the SCROLL/
SELECT knob to save the seing.
15.4.5 Summer time
For the correct display of the time via the Internet, the current summer or winter
time must be configured.
> In the [System Seings] submenu, select [Time/Date] > [Summer Time] and
press the SCROLL/SELECT knob.
> Use the SCROLL/SELECT knob to select > [Summer Time] > [YES] or [NO]
and press the SCROLL/SELECT knob to save the seing.
15.4.6 Auto standby
Under this menu item you can define the time aer which the DIGITRADIO 21 IR
automatically switches to standby (if it is not operated or no playback takes place).
> In the [System Seings] submenu, select [Auto Standby] and press the
SCROLL/SELECT knob.
> Use the SCROLL/SELECT knob to select a time and press the SCROLL/SELECT
knob to save the seing.
15.5 Language
> In the [System Seings] submenu, select [Language] and press the SCROLL/
SELECT knob.
> Use the SCROLL/SELECT knob to select one of the available languages and
confirm the selection by pressing the SCROLL/SELECT knob.
15.6 Factory seings
If you change the location of the device, e.g. when moving house, it is possible that
the saved stations may no longer be received. In this case you can reset the device to
factory seings to delete all the saved stations and then initiate a new scan.
> In the [System seings] submenu, select [Factory seing] and press the
SCROLL/SELECT knob.
> Use the SCROLL/SELECT knob to select the [Yes] item to reset the factory
seings and press the SCROLL/SELECT knob.