TechniSat DIGITRADIO 380 CD IR

53
DE
EN
FR
NL
6.4.4 Adjusting the volume
> Use the VOL +/- (10, 23) buons on the remote control or VOLUME +/- (10)
on the device to set the volume. The set volume is shown on the display.
6.4.5 Activating the mute function
> You can switch o the volume at the touch of a buon using the MUTE
buon (13).
This mode is indicated in the status bar by a corresponding icon.
> Pressing the MUTE buon again switches the volume back on.
6.4.6 Accessing displays
> By repeatedly pressing the INFO (6) buon during the playback of a source,
certain extra information can be viewed and scrolled through.
6.4.7 Displays
Current source
Station name,
track, artist,
additional info,
menu, lists
Time
Status bar
The displays shown can vary depending on the selected function/source. Take
note of the instructions on the display.
7 Menu navigation
Menu navigation primarily takes place using the MENU,/ and OK buons on the
remote control, or the INFO/MENU buons and the TUNING/OK knob on the device.
The menu is divided into the respective submenu for the currently selected source
and the main menu. Press the MENU buon (on the remote control) or hold down
the INFO/MENU buon (on the device) until the submenu for the current source
opens up.
You can navigate using the / buons on the remote control or by turning the
TUNING/OK knob. Press the OK buon on the remote control or the TUNING/OK
knob on the device to make a selection.
* highlights the current selection.