TechniSat DIGITRADIO 380 CD IR

64
14.3 Playing CDs
> Switch to CD player mode by pressing the MODE buon.
>
[CD] is shown on the display.
> Open the CD tray using the Eject buon (1 or 7 on the device). Then place
the CD in the tray with the printed side up and close it again with Eject.
> The data on the CD is scanned. The display shows [Loading]. Playback then
begins with the first track (audio CD) or the first track in the first folder (MP3 CD).
Do not perform any operation until the CD content has been completely read,
to ensure that all the required information on the CD has been read. This
process can take some time, particularly with MP3 CDs.
Please hold the CD by the edge when inserting/removing.
> By pressing the Play/Pause buon , you can pause playback (the playing
time flashes on the display), or continue playback by pressing it again.
> Use the Stop buon to stop playback. The total number of tracks
appears on the display.
Always stop playing a CD before removing it.
14.4 Picking a track
> Use the Previous Track or Next Track buons to skip to the next
or previous track.
The display shows the respective folder [F] and track [T] number.
> You can use the F+ and F- buons to select the folder on MP3 CDs.
14.5 Quick search
While the track is playing, you can perform a quick search forwards or backwards to
find a specific section.
> Hold down the Previous Track or Next Track buons to skip
forwards or backwards quickly within a track for as long as the buon is held
down.
14.6 Repeat function
You can select whether a track, the entire folder/album (only for MP3 CDs) or all of
the tracks on the CD are to be repeated.
> Press the Repeat buon several times.
The selected mode appears on the display using an icon (Repeat Track,
Repeat Album, Repeat All, Shue).