TechniSat DIGITRADIO 380 CD IR

65
DE
EN
FR
NL
> To switch the function o again, press the Repeat track buon as oen as
required until the icon no longer appears.
> Press the Shue buon (5) to play the tracks in a random sequence.
14.7 Programming playback
You can programme up to 20 tracks on a CD in any sequence.
> Stop any playback in progress by pressing the STOP buon .
> Press the PRESET buon on the remote control, or 5+ on the device to
access the programming mode.
The display now shows [P01] for the first track to be programmed.
> Using the / buons, select a track and press the OK buon to
accept the storing.
> Then [PO2] is displayed for the second track which you can also add as
described above.
> When programming is complete, press the Playback/Pause buon .
To delete programming, either press Stop 2x or open the CD tray using
the Eject buon.
15 Audio input
You can play sound on an external device via the DIGITRADIO 380 CD IR speaker.
> Connect the external device to the AUX-IN port (16, 3.5 mm stereo jack) on
the back
> Use the MODE buon to select the audio input. [Aux-In] appears on the
display.
The playback is controlled on the external device. Do not set the volume too
low to prevent interference.
16 Other functions
16.1 Sleep function
> Press the MENU buon and then select [Main Menu > Sleep].
> You can use the  or  buons to set the period for Sleep o in 15, 30, 45
or 60 minute intervals, aer which the device switches to standby while in
any operating mode.