TechniSat DIGITRADIO 570 CD IR

67
DE
EN
FR
NL
Volume
> Use the / buons to select the volume with which you wish to be woken
up.
Saving
> Press the OK buon to save the alarm.
The alarm is active as soon as you have set the alarm repeat to Daily, Once,
Weekend, or Workdays. The status bar shows an alarm symbol with the
corresponding number of the active alarm and the alarm time.
16.2.2 Switching the alarm o aer it has gone o
> Press the On/Standby buon to turn o the alarm.
The alarm symbol appears on the display again if the alarm repeat is set to
Daily, Weekend or Workdays.
16.2.3 Switching o the alarm
> In the menu select the relevant alarm under > Repeat: O.
17 System seings
All seings explained in this section apply equally to all sources.
> Open the menu and use the  /  buons to select >
[System Seings]. Press the OK buon to open the system seings.
17.1 Equaliser
> Press the MENU buon and then select [System seings] > [Equaliser].
Here you can carry out dierent equaliser seings to adapt the sound to your taste.
You can choose from:
Middle, Jazz, Rock, Classic and Pop.
> Use the / buons to select the equaliser seing and press the OK buon
to accept the seing.
17.2 Audio stream quality
The quality of the audio stream may be adapted to the Internet speed. The higher
the quality, the higher the data transfer rate.
> Press the MENU buon and then select [System seings] > [Audio stream
quality].
> Selecta quality level and press the OK buon to save.