36
8.15.8 Search engine
>
By using Option Selection to call up the Web search item, the search engine web page selected is
automatically called up. You can change the search engine under Menu > Settings > Special functions > Internet.
8.15.9 Status
The status display gives you a quick overview of the technical details for the active web page.
> To do so, select the Status option in Options Selection.
> Using the up/down arrow keys, you can select the general status or the secure status and then
display by pressing the OK button.
8.15.10 Ending the Internet session
> To switch from a web page you have called up back to normal mode, press the WWW button three
times or press the TV/Radio button.
9 DVR mode
The DVR function (DVR=Digital Video Recorder) means you no longer have to use an external recorder (e.g.
video or DVD recorder) to record programs, as you can use this function to record them to a USB storage device.
The recording capacity thus depends on the volume of data in the broadcast material and the size of the
storage medium.
When doing so, pay careful attention to the information and settings in the operating instructions.
9.1 DVR recording
Before starting a DVR recording, please define which storage medium should be used as a
recording medium.
The following recording modes are available for DVR recording:
1. Record immediately
Select this type of recording to immediately record the program currently being broadcast at the push of
a button.
2. Timer-controlled recording
This function is used to switch your digital receiver on and off to record the selected program onto the
recording medium while you are out. The timer can be either manually programmed or automatically
programmed via the SFI function.
3. Timeshift recording
Timeshift recording enables timeshifted TV viewing. You can start to play back a program while it is still
recording (= timeshifting).
To Next Page
Loading...
