To Next PageTo Next Page
Need help?Do you have a question about the TechniSat DigiPlus STR 1 and is the answer not in the manual?
General| Tuner Type | DVB-S2 |
|---|---|
| Type | Satellite Receiver |
| DVB Standard | DVB-S2 |
| Input Impedance | 75 Ohm |
| USB Port | 1 x USB 2.0 |
| Ethernet | Yes |
| Wi-Fi | No |
| Input Frequency Range | 950 - 2150 MHz |
| LNB Power | 13/18 V |
| DiSEqC | 1.0/1.2 |
| Video Decoding | MPEG-2 |
| Audio Decoding | MPEG-1 Layer I & II |
| Connectors | 1 x HDMI, 1 x USB, 1 x Ethernet |
| Video Output | HDMI |
| Audio Output | HDMI |
| Resolution | 1080p |
| Symbol Rate | 2...45 Msps |
Explains the On Screen Display (OSD) and key designations for user interaction.
Instructions for proper disposal of equipment and crucial safety precautions for handling.
Guidance on disconnecting the device during thunderstorms or extended periods of non-use.
Steps to power the receiver on and put it into standby mode.
Methods for selecting TV and radio channels.
Viewing encrypted channels and using special channel features.
Adjusting volume, switching TV/radio, and selecting audio modes.
Returning to last channel, displaying info, transponder data, freeze frame, sleep timer.
Accessing video text and subtitle features.
Adjusting picture aspect ratio for different screen formats.
Accessing and using the electronic programme guide.
Setting up and managing timer-based recordings.
Managing and organizing favourite channels.
Configuring settings related to the SFI electronic programme guide.
Setting up child lock features and PIN codes.
Finding new channels via automatic, satellite, or manual searches.
Accessing factory settings and managing channel lists.
Viewing current system and software information.
Managing smart cards and CA modules.
Setting rotation limits for the motorized dish.
Using geographical coordinates to aid satellite dish alignment.
Adding and configuring satellite orbital positions.
Viewing and managing saved satellite positions.
Removing satellite positions from the list.
Setting the dish to its reference (0°) position.
