> If this channel is to be generated, select the field YES, using the up/down arrow
keys and conform with OK. The channel will now be generated and will be added to
the end of the Favourites List.
> You can abort the search run by pressing the red function key.
8.4.5 During the search
Even during the search, the scanning of the transponder can be viewed on-screen.It shows:
The satellit, on which the search is currently performed (1), the nukber of channels already
found (2), the last channels to be found (3), the transponder, which nis currently scnned (4),
as well as the progress of the search (5) and the transponder of the satellite, which is cur-
rently scanned (6).
8.4.6 After the search run
After the search, a message will b displayed on screen with the information of how many
channels have been found by your digital receiver, hoiw manz have been addes as new and
how many are encrypted. In additiionn to this, you receive a message, asking you whether
the channels found should be sortred into the TV and radio lists automatically or whether this
should be done manually.
Sort automatically
The channels found are sorted into the main list with the help of a pre-channeld list. Here,
the order of channels depends on the audio languagge set in Section 6.3.2 or the countrt set
in Section 6.2.2.
Attach automatically
The newly found channels are attatched to the end of the main favourites list unsorted.
Sort TV manually / Sort radio manually
This way you directly arrive in nthe menu Managing TV-Lists or Manage Radio Lists. Arrow
key down.
Back
The newly found channels are not added to the favourites list, but only to the complete list.
> Using the up/down arrow keys select the required procedure.
> Conform with OK Please observe further screen inserts.
> Pressing the Menu key returns you to normal operation. Regardless of whether you
have added the newly found channels to the favourites list automatically, you an con-
tinue to edit the favourites klists nanually as described in Section Punkt 9.1.
8.5 Service settings
You can use the factory settings at any. You can also completely delete the channel list, if
this is obsolete due to changes of the channel providers, in order to then accomplish a new
search run. Please ensure, that you initiate a search run after deleting and then copy the
required channels contained in the complete list to the favourite list.
> Call the Main menu with the Menu key.
> Now select the menu line Settings, by highlighting this with the arrow keys
up/down.
42
To Next Page
Loading...
Need help?
General
