TechniSat S1 User Manual

DiSEqC
1.2
Integrated
video recor-
der
P V R
For the reception of free-to-air and encrypted pro-
grammes broadcast via satellite, (e.g.. VIACCESS,
IRDETO, SECA ,etc. )
Operating Manual
with integrated
Premiere decoding system
and PCMCIA interface for
a CI Module.
With integrated Premiere decoding system and
PCMCIA interface for installing a CI module.
Operating Manual
DigiCorder S1
Digital receiver
with
integrated hard disk drive
Bed_anl_.qxd 20.02.04 16:28 Seite 1

TechniSat S1 Specifications

General

HDTV	Yes
Free-to-air	Yes
Ethernet	No
Type	Digital Satellite Receiver
Power Supply	12V DC
Input Frequency Range	950-2150 MHz
Demodulation	QPSK
DiSEqC	1.0, 1.2
Video Decoding	MPEG-2, MPEG-4
Audio Decoding	MPEG-1 Layer I & II
Video Output	SCART
Audio Output	RCA

Summary

Getting Started

Important Information and Safety Precautions

Essential guidance before first use, including safety notes, operational tips, and disposal information.

Connections

Initial Installation Process

Step-by-step guide for the initial setup assistant, covering language, country, antenna, and software updates.

Receiver Settings and Configuration

Antenna and Satellite Setup

Detailed configuration for satellite antenna, DiSEqC control, switching matrix, and additional LNC characteristics.

Receiver Operation and Features

Programme Selection and Navigation

Electronic Programme Guide (SFI)

Hard Drive Recording and Playback

Comprehensive guide to instant recording, timer recordings, timeshift, playback, and managing recordings on the hard drive.

Troubleshooting Guide

Common Problems and Solutions

A comprehensive guide to diagnosing and resolving common issues encountered with the receiver's operation and features.