EasyManuals Logo

TechniSat DigiPlus STR 1 User Manual

TechniSat DigiPlus STR 1
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
6.1 Operating language
This menu item enables you to set the menu language according to your requirements.
To change the operating language proceed as follows:
> Call the Main menu with the Menu key.
> Now select the menu line Operating language, by highlighting this with the
arrow keys up/down.
> Acknowledge with OK. The Operating language submenu is displayed.
> Select the required language with the arrow keys up/down.
> Store the input by pressing the OK key.
> Pressing the return key will return you to the settings menu
6.2 Basic settings
In order to use your DVB receiver optimally, you must also set it to your individual applicati-
ons.
> Call the main menu by clicking on Menu.
> Select the Settings line with the arrow keys up/down.
> Acknowledge by pressing the OK key. The Settings submenu is displayed.
> Select the Basic settings line with the arrow keys up/down.
> Confirm with OK. The Basic settings menu is displayed.
> You can move the marker through the menu and amend individual positions as indi-
cated with the arrow keys up/down. Pay attention to the screen inserts when
selecting a menu option, if applicable. The following settings can be carried out:
6.2.1 Time difference GMT (h)
Your device is equipped with a clock. This is synchronised by means of the cable reception
to Greenwich Mean Time.
If the setting None has been set under Country (Section 6.2.2), you must only correct the
time according to your local time with the arrow keys right/left. This difference is for
Germany+1 hour, in the summer time +2 hours.
6.2.2 Country
This function will automatically switch between summer time and winter time.
> Insert your home country by using the up/down arrow keys in the Country line.
6.2.3 Remote control code
Up to four different devices, using the same remote control code, can be operated with the
remote control of your receiver. If two satellite receivers are operated in the same room, this
may lead to unintentional operating errors. In order to avoid such operational errors in future,
you should set both receivers to different remote control options.
14

Table of Contents

Other manuals for TechniSat DigiPlus STR 1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TechniSat DigiPlus STR 1 and is the answer not in the manual?

TechniSat DigiPlus STR 1 Specifications

General IconGeneral
BrandTechniSat
ModelDigiPlus STR 1
CategoryReceiver
LanguageEnglish

Related product manuals