35
EN
6.6 Volume control
You have the option of adjusting the volume on your digital receiver. This facilitates
operation of the receiver, as it means you can access all the major functions on a
single remote control, and will only rarely have to resort to using the remote control
for the TV.
> Adjust the volume up or down on your receiver using the Volume + rocker
and the Volume - rocker.
During volume adjustment, the currently set volume is displayed at the upper
edge of the screen.
When you switch on the digital receiver, sound will be reproduced at the
volume level last set.
Volume control and the mute buon also control the digital audio outputs (not
for the bit stream seing) and switch these to mute.
6.7 Mute function
> By pressing the Mute on/o buon the sound is switched on or o by
pressing this buon.
Throughout the time that the volume is switched to mute, the symbol
appears at the upper right of the screen.
6.8 Selection of another language / sound option
For some channels you have the option of selecting a dierent sound option (Dolby
Digital, Stereo or Audio Channel 1 or Audio Channel 2) or another language.
If a channel has various sound options or languages, this is displayed by the
Sound indicator along with the currently selected sound option or language
on the lower edge of the extended channel information.
If a set programme is also being broadcast in Dolby Digital Sound, the
symbol also appears in the info box.
To Next Page
Loading...
Need help?
General
