REASSEMBLY OF PARTS
Once the parts have been washed, rinsed and sanitized, the machine is ready to be reassembled. Before
starting the reassembly process, sanitize your hands by immersing them into the sanitizing container.
Lubricate all the parts using the food-grade lubricant supplied with the machine kit.
Reassemble the parts in the reverse order to the disassembly instructions.
Sanitizing the machine
The reassembled machine must be sanitized before refilling it with a new mix.
The washing and sanitizing procedure must comply with what foreseen by your local and/or state Health
Authorities. If you are uncertain of these regulations, verify what specified by the Federal, state, or local
regulatory AHJ.
For Sanitizing operational instruction see items 3 to 7 of page 24.
Do not exceed in the dose of the sanitizing product (please check the indications above)
NEVER USE CHLORINE when performing this operation as it could damage the plastic parts
and corrode the stainless steel walls.
Never leave the sanitizing solution in the machine for over one hour to avoid any corrosion of
the parts.
Never use cloths and never touch the sanitized parts with your hands as this will
contaminate them.
The machine is now ready to be filled with a new mixture.
To Next Page
Loading...
