Technogym MB430 - Securing the Equipment

B
A
C
A
B
C
Dual Adjustable Pulley
21
Securing the equipment
WARNINGS
It is mandatory to secure the equipment to the oor with the specic xing
screws.
Technogym cannot be held liable for any damage caused by failure to secure
the equipment.
To secure the equipment, use anchor screws which strictly comply with the
following minimum requirement: minimum guaranteed load of 50 kg.
Proceed as follows to secure each frame to the oor:
- mark the position of two 14 dia. holes on the oor;
- drill the holes in the oor;
- insert the rawl plugs (A) in the holes in the brackets (B);
- screw and tighten the screws (C) in the oor.