Technogym MB430 - Component Replacement; Replacing the Spring Hook

Dual Adjustable Pulley
23
Replacing the spring hook
WARNING
Once a month, carefully check the conditions of the spring hook.
Always replace the spring hooks as soon as you notice the slightest signs of wear, deformity,
diculty closing, or anything else that may interfere with its robustness.
When replacing, always use a spring hook supplied directly by Technogym. If it is impossible to obtain an original part, use a spring hook that strictly
meets the following minimum requirements:
- materials used: AISI 316 stainless steel;
- maximum capacity on main axis: 800 kg (1764 lb).
WARNING
Do not alter the spring hooks in any way.