Technogym Recline Forma - Programming Personal Profiles

22
Bike, Recline, Synchro - Advanced LED display
Programming personal proles
the key in standby.
tof1
Press number keys 3 6 9 simultaneously to access personal proles management.
of1
Type in the number of the prole to be saved with the number keys, then press ENTER to conrm. If the number entered corresponds to a previously stored
prole, this prole will shown in the goal dial display; if you proceed at this point, the previously stored prole will be overwritten.
1foowfo1
Press number key 1 to program a constant power prole, or number key 2 to program a constant heart rate prole.
too
Press the key for the selected GOAL.
Now there is the programming of the individual steps: for each step you have to enter dierent parameters, depending on the type of prole selected.
• For the constant power prole, you must set the selected GOAL value and power:
t1t
t1t
Type in the goal value with the number keys and then press ENTER to conrm and proceed.