12
Chest Incline
B
C
DD D
E
Lifting and moving the equipment
To facilitate passage through narrow doorways, transport and handling, it is
possible to remove the seat and the easy start device.
To remove the seat, proceed as follows:
- operate lever (B) and completely lower the seat (C);
- remove one of the three screws (D) and screw it into the hole behind tube (E)
of the seat;
- remove the other screws (D) and then remove the seat (C).
To reassemble the seat, carry out the above steps in reverse order. Keep the
seat (C) pressed downward while loosening screw (D) from behind the tube.
WARNING
During this operation do NOT operate lever (B).
To Next Page
Loading...
