14
99834169
A
A
B
B
Multi Hip
Contents
Proceeding in the same way, lift the
equipment on platform side and insert the
castor wheels, as shown in the figure: insert
the threaded pins (A) in the special holes
on the crosspiece, then lock down the wing
nuts (B).
Finally, lift the equipment again, remove the
safety wedges and place the wheels on the
floor.
Warning
The fixed wheels must always
be placed underneath the weight
stack.
When moving the equipment, push it
only from the weight stack side, and
not from the other sides.
When lifting the equipment, do not
exert pressure against the weight
stack guard.
Do not use the equipment with the
wheels inserted. The wheels serve
only for moving the equipment and
must be removed before using the
equipment.
Lifting and handling the equipment
cont.
Identification of the manufacturer
and equipment
Description of the equipment
Technical data
Accessories
Assembling the number holder
Safety labels and devices
Packing
Place of installation
Unpacking
Lifting and handling the
equipment
Adjusting the equipment
Assembling the equipment
Routine maintenance
Replacing the padded
components
Replacing the cable
Adjusting cable tension
Technical Service
Codes for original spare parts
Storage
Disposing of the equipment
Using the equipment
To Next Page
Loading...
