18
SKILLBIKE
ELECTRICAL CONNECTION
Before connecting the product to the mains power supply, ensure that the electrical system specications comply with current regulations. Check the
mains power supply specications on the identication label.
Plug the power cable into the product socket rst and then into the wall socket.
Run the cable through the special ties.
When you connect the product to the electricity supply, you may hear a noise coming from inside, which is caused by the automatic resetting procedure.
W
Check the state of the power cable periodically.
The wall socket must be located in a place where the unit may be easily and safely plugged in and unplugged.
To Next Page
Loading...
