Technogym SKILLBIKE - Page 20

20
SKILLBIKE
MAINTENANCE
Description Type of check
Regularity of
action
Type of action
Cleaning Check that the product is clean. Every day
After every use, clean the product with a damp sponge and neutral soap to
remove moisture and perspiration, then dry it well.
Remove dust from the grill carefully.
Pedals
Check the level of wear and tear on the
pedals and ensure that they are securely
fastened to the pedal cranks.
Every 6 months
In the event of faults, contact the Technogym Technical Support
Service.
Saddle Check that the saddle is stable. Every 6 months Tighten the two saddle attachment nuts with a 25 Nm torque wrench.
Displayed
watts
Ensure the wattage displayed on the
console matches your perceived exertion.
Every 6 months
Calibrate the torque ange and belt. See the console manual for
calibration instructions.
Gear unit
Ensure the gears engage correctly with
the handlebar in two dierent positions.
Every 6 months
In the event of faults, contact the Technogym Technical Support
Service.