Technoline WS9132 - Max Min Temperature Humidity

WS9132 Manual
 If the Weather Station failed to receive transmission from outdoor
sensor (“- -.-”display on the LCD), press and hold the “CH” button
for 3 seconds to receive transmission manually. RF icon “ ”
flashes on the LCDof the Weather Station to receive the remote
sensor.
 If the weather station is used with 2 or 3 transmitters, press “+/CH”
button shortly to display CH2, CH3 or cyclic display.
P re ss "+ /C H "
P re ss "+ /C H " P re ss "+ /C H " P re ss "+ /C H "
A u to m a tic A u to m a tic
A u to m a tic
5S 5S
Maximum/minimum temperature/humidity
 Press “MEM” button once, the LCD will display maximum value of
temperature/ humidity. If the “MEM” button is pressed again the
minimum value is displayed.
 While displaying MAX or MIN values, there is “MAX” or “MIN” on the
LCD.
 Press and hold “MEM” button for 3 seconds. The
temperature/humidity maximum/minimum value will reset to the
current values
Please note: