Technotherm VPS 1000 - Page 11

Installaon and Operang Instrucons
VPS devices
Feel good through warmth from electricity - www.technotherm.de
GB
9. Addional wall mounng informaon
1. Drill three holes of 7mm and x the wall bracket. Screw in the three 4 x 25 mm screws into the wall
2. Click the heater rst at the top into the wall bracket and then at the boom. The heater will be xed
“automacally”.
Topside of heater
Wallmount:
xing with 3 screw!
mount locked!
Underside detailview
Press a screwdriver
into the groove to
unlock the mount.
mount is unlocked
Switch of the Heater from the
Wallmounng
1. Press the screwdriver into
the groove.
2. Remove the Heater from the
Wall
Wall