technotrans manroland beta.d 40 - Page 55

Components
55
Connector Description
ST11
Digital inputs
ST12
Analog inputs
ST13
Analog inputs
ST14
Analog inputs: KTY temperature sensor
ST15
Analog inputs
only TBC 50/51 ST16
Analog outputs
ST20
Power supply
ST30
Connection to interface card CAN-SUB-Print
ST31
Connection for optional input/output modules
Jumper,
connected
Description
J2
Release to evaluate the redundancy contact through the unit
software if an alcohol stabiliser is used.
J3
Output ST4.2 bridging
J4
Output ST4.3 bridging
J5
Output ST4.4 bridging