TECHTOP TD20 Series - P07 Group Human-Machine Interface

TD20 Series VFD Function Parameters
-50-
Function
code
Name
Detailed instruction of parameters
Default
value
Modify
P05.37
Lower limit of
AI2
Corresponding
setting
100%
-100%
-10V
Al3
AI1/AI2
20mA
AI
10V
Input filter time: this parameter is used to adjust the
sensitivity of the analog input. Increasing the value
properly can enhance the anti-interference of the
analog, but weaken the sensitivity of the analog input
Note: AI1 supports 0–10V input and AI2 supports 0–10V
or 0–20mA input, when AI2 selects 0–20mA input, the
corresponding voltage of 20mA is 10V. AI3 can support
the output of -10V–+10V.
Setting range of P05.32: 0.00V–P05.34
Setting range of P05.33: -100.0%–100.0%
Setting range of P05.34: P05.32–10.00V
Setting range of P05.35: -100.0%–100.0%
Setting range of P05.36: 0.000s–10.000s
Setting range of P05.37: 0.00V–P05.39
Setting range of P05.38: -100.0%–100.0%
Setting range of P05.39: P05.37–10.00V
Setting range of P05.40: -100.0%–100.0%
Setting range of P05.41: 0.000s–10.000s
Setting range of P05.42: -10.00V–P05.44
Setting range of P05.43: -100.0%–100.0%
Setting range of P05.44: P05.42–P05.46
Setting range of P05.45: -100.0%–100.0%
Setting range of P05.46: P05.44–10.00V
Setting range of P05.48: 0.000s–10.000s
0.00V
○
P05.38
Correspondin
g setting of the
lower limit of
AI2
0.0%
○
P05.39
Upper limit of
AI2
10.00V
○
P05.40
Correspondin
g setting of
the upper limit
of AI2
100.0%
○
P05.41
AI2 input filter
time
0.100s
○
P05.42
Lower limit of
AI3
-10.00V
○
P05.43
Correspondin
g setting of the
lower limit of
AI3
-100.0%
○
P05.44
Middle value
of AI3
0.00V
○
P05.45
Correspondin
g middle
setting of AI3
0.0%
○
P05.46
Upper limit of
AI3
10.00V
○
P05.47
Correspondin
g setting of
the upper limit
of AI3
100.0%
○
P05.48
AI3 input filter
time
0.100s
○
P05.50
Lower limit
frequency of
HDI
0.000kHz–P05.52
0.000
kHz
○
P05.51
Correspondin
g setting of
-100.0%–100.0%
0.0%
○