TECHTOP TD20 Series - Page 53

TD20 Series VFD Function Parameters
-51-
Function
code
Name
Detailed instruction of parameters
Default
value
Modify
HDI low
frequency
setting
P05.52
Upper limit
frequency of
HDI
P05.50–50.000kHz
50.000
kHz
○
P05.53
Correspondin
g setting of
upper limit
frequency of
HDI
-100.0%–100.0%
100.0%
○
P05.54
HDI frequency
input filter time
0.000s–10.000s
0.100s
○
P06 Group Output terminals
P06.01
Y1 output
selection
0: Invalid
1: In operation
2: Forward rotation operation
3: Reverse rotation operation
4: Jogging operation
5: The VFD fault
6: Frequency degree test FDT1
7: Frequency degree test FDT2
8: Frequency arrival
9: Zero speed running
10: Upper limit frequency arrival
11: Lower limit frequency arrival
12: Ready for operation
13: Pre-magnetizing
14: Overload pre-alarm
15: Underload pre-alarm
16: Completion of simple PLC stage
17: Completion of simple PLC cycle
18: Setting count value arrival
19: Defined count value arrival
20: External fault valid
21: Reserved
22: Running time arrival
23: MODBUS communication virtual terminals output
24–25: Reserved
0
P06.03
Relay RO1
output
selection
1
○
P06.04
Relay RO2
output
selection
5
○